FAQ

Yes. it was developed from latest standard Canaan AvalonMiner firmware.

For the Raspberry Pi controller (Raspberry Pi 3 Model B) You can do this from the web interface: "System -> Backup/Fash firmware -> Flash new firmware image", select our software you downloaded (no need to unzip) and Select "Flash image". You need to select "Keep settings" option to save system settings like IP, Miner Pools, etc

But to install on the main controller of the company with H3 hardware (vidtoo H2 plus Model A), due to the small internal memory of the controller, you must use MicroSD memory card the first time. But after that you can do the next versions like Raspberry Pi through the web interface.

At the time of downloading, if you pay attention, there are two versions available for each device. One with the default setting of receiving IP from the modem and the other with the default address of 192.168.1.15, which is suitable for working with most current Internet modems and makes the work easy.

If you have downloaded the version with IP 192.168.1.15 and your internet modem network is in the same range as the address 192.168.1.0, the network connection has been established without any problem and you can connect to the web user interface of the device with the address 192.168.1.15 and set the settings. In addition, you can give a manual IP to your computer or laptop (for example 192.168.1.10) and connect it to the device with a network cable in a back-to-back manner and change the settings as desired, and then the device to the modem network. Connect yourself. (For example, by making wireless settings on Raspberry Pi devices and connecting wirelessly to the Internet modem)

If you download the version with the default setting of receiving IP from the modem (DHCP), the device will receive an IP from your Internet modem by connecting the cable. To find the IP, you can use advanced ping programs such as Advanced IP Scanner or the Internet modem user interface that displays the IP information of devices.

Yes. In one of the following two ways:

Download our firmware and unzip it. Simply write the unlocked firmware to the SD memory card by a program such as "Win32DiskImager" (SD capacity size must be between 2GB and 16GB, do not use 32GB SD cards). Insert this new SD card into the Raspberry Pi 3 controller and boot. It simply receives an IP from your internet modem and you can connect to the management interface and do the rest of the settings.

You can do this from the web interface: "System -> Backup/Fash firmware -> Flash new firmware image", select our software you downloaded (no need to unzip) and Select "Flash image". You should not select "Keep settings" to reset configuration such as IP, Miner Pools, etc. to default settings. After the first boot, just get the IP from your internet modem and you can connect to the management web interface.

Yes. In one of the following two ways:

Using the content of the support group in Telegram:

Telegram: Telegram avalonusers group

Direct message to the support team in Telegram:

Telegram: Telegram Avalonusers Support

As you know, mining for Iranian IP is blocked in many mining pools due to sanctions. Also, from an internal point of view, having a VPN can eliminate the worry of network traffic monitoring and miner detection. Other benefits of activating the internal VPN of this software:

• Ability to F2POOL and Binance POOL mining pools and benefit from lower fees and bypass sanctions
• Impossibility of detecting mining activity and hash theft with Spoofing
• Significant drop in rejects due to connection management and network error correction
• Not being interrupted even during the nationalization of the country's network under certain conditions
• Completely free and equipped with many quality servers in European countries
• Activation of the ability to send messages to Telegram by the device according to whether Telegram is filtered

The special feature of Remote Control does not require membership fees and registration of information and IP in Iranian companies and can be used from a computer or mobile phone through an Internet browser such as Firefox or Chrome without the need to install any software. How to use:

• After installation and after establishing an internet connection, your device will be activated with a 5-digit ID and a suitable password.
• RemoteControl status is displayed in the upper left corner of the web user interface.
• By referring to http://remote.avalonusers.com:33000/ and enter the 5-digit ID and password to enter the user interface page of your device
• You can connect to your device without the need to install applications and software and just using the internet browser in Windows or mobile phone.

If there are several separate controllers, due to the system assignment of a separate username and password for each controller, in order to connect to subsequent systems from the same mobile device or computer, once on this link http://remote.avalonusers.com:33000/logout or use the logout option at the top of the page to You will be asked for username and password again. The system will automatically direct you to the relevant system based on your username.

Miner Monitoring Service has the following very useful features:

If this option is enabled, the following controls are performed:

• Controlling the running of the mining service
• Checking the detection of at least one device and successfully performing mining operations in the last 3 minutes
• Detection of AUC interface errors
• Controlling the temperature of the chips and the minimum amount of hash rate of the devices
• Controls related to cgminer service
• Information via SMS and Telegram (if settings are made)
• Ability to view sent messages

Some adjustable parameters:

• The time interval of monitoring parameters such as temperature, mining execution, equipment failure, etc.
• Abbreviated name of the controller that is sent in the SMS text, which is used when there are multiple controllers in one form. Using long names increases the length of SMS and the cost of sending.
• The alarm temperature is the temperature that only a warning message is sent if the temperature of the device's chips reaches this number. If the temperature is normal, a message will be sent. By selecting the Disable option, the message will not be sent in this regard.
Setting the dangerous temperature, which in case the temperature of the device's chips reaches this number, in order to prevent damage to the device, while sending a message, the mining service will stop and start. By selecting the Disable option, if the temperature of the chips rises, the mining service will not be interrupted and no message will be sent in this regard.
• If the total number of devices connected to this controller falls below this number in the last five minutes, a warning SMS will be sent. Due to the variability of the amount of mining due to the blockchain network and also the decrease in the efficiency of the devices over time, in order to avoid sending many messages to you, the desired number should be considered a little lower than the nominal power of the device. For example, if you have three 15-terahertz devices connected to this controller, it is better to enter a number less than 45 (for example, 40).
• The service is programmed in such a way that if an error is received from AUC and the error is not resolved by stopping and starting the mining service, while sending a message, it will reset the entire controller after two minutes. If you do not need this feature, you can disable it. disabled.
• If this option is enabled, if some errors are received from the mining service (cgminer), the system will stop and start the mining service to fix the error.

After entering the user interface and selecting Services => Miner Monitoring Service and making settings according to the following description:

Settings for sending messages through Telegram (free of charge) Due to Telegram's filtering, Miner VPN service must be active and connected to use this feature.

• Enable and disable sending messages to Telegram
• Telegram's exclusive number that receives system messages. This number is different from your Telegram mobile number. To get this number, you must send a regular message to @get_id_bot through your Telegram (the Telegram that wants to receive messages). . In your response, the bot will return an eight-digit number called Your Chat ID, which you must enter here. Also, you must send a simple message to the bot @avalonusers_bot only once so that Telegram security allows you to receive messages from this bot. /li>
• In the previous method, you can also define the second recipient in Telegram
• Send a test message of your Telegram to ensure the correctness of the Telegram settings. Before testing, the changes must be saved by the Save Apply button.

Settings related to receiving SMS from the system:

• Activating and deactivating SMS sending, if it is inactive, monitoring operations and actions are performed, but no SMS is sent.
• The mobile phone number that receives system messages. Preferably the first cell phone. For example: 09121234567
• Second mobile number to receive system messages. If not needed, enter --
• Please note that the entered mobile numbers should not limit the receipt of promotional SMS. Unless they go through the necessary permissions at the time of receiving the SMS panel, which is a complicated process.

SMS panel settings via the Internet. To register and receive the panel number and password, go to the site Meli Payamk

• Username of the SMS panel, which is usually the registrant's mobile phone number.
• SMS panel password
• Allocated SMS number, from which SMS will be sent to you. For example: 50006000123456
• Sending a test SMS from the SMS panel to your mobile number to ensure the correctness of the settings of the SMS panel. Before testing, the changes must be saved by the Save Apply button.